Carbon composite based, low density NON-CERAMIC FOAM FILTERS . Working temperature up to 1100 ºC. Most suitable for the filtration of molten aluminium and its alloys and part of molten copper and its alloys.
Alumina (Al2O3) based CERAMIC FOAM FILTERS . Working temperature up to 1100 ºC. Most suitable for the filtration of molten aluminium and its alloys and part of molten copper and its alloys.
REFRACTORY GATING SYSTEM. Fireclay shapes in the
R-SLI-k grade are fine-grained shaped refractory products with increased
resistance against penetration by molten metal.
Complete casting systems including ladle closing systems and their individual
parts are manufactured in accordance with customer specifications.
Funnels, tubes, reduction
tubes, elbows, crevices,
splash cores and other special accesories with diameter 30 mm
to 120 mm are offered.
HIGHLY
EXOTHERMIC INSULATING SLEEVES for feeder of pieces, melted in
iron, steel and all the alloys of those metals, cast in sand and other systems.
These sleeves provide good pieces, without porosity and without reaction of the
metal with the sleeve.
Silicon carbide (SiC) based CERAMIC FOAM
FILTERS. Working temperature up to 1540 ºC. Most suitable for the
filtration of casting iron, copper and its alloys.
STRONG SHAPED
HIGHLY EXOTHERMIC INSULATING SLEEVES for feeder of pieces, melted
in iron, steel and all the alloys of those metals, cast in sand and other
systems. These sleeves provide good pieces, without porosity and without
reaction of the metal with the sleeve.
Partially stabilized zirconia (ZrO2) CERAMIC FOAM
FILTERS. Working temperature up to 1750 ºC. Most suitable for the
filtration of molten steel, stainless steel and super alloys.
EXTRA-STRONG
SHAPED HIGHLY EXOTHERMIC INSULATING SLEEVES for feeder of pieces,
melted in iron, steel and all the alloys of those metals, cast in sand and other
systems. These sleeves provide good pieces, without porosity and without
reaction of the metal with the sleeve.
HIGHLY
INSULATING SLEEVES for feeder of pieces melted in iron, steel,
copper, aluminium and all the alloys of these metals, cast in sand and other
systems and specially for very low stainless steels in carbon. These sleeves
provide good pieces, without porosity and without reaction of the metal with the
sleeve.
Instant
inquiry
